CLONNING LIGHT SOURCE 120°

Price

265,00 zł

More info

Lightsource for Cloning was designed specially to provide highest performance during the process of rooting clones. Special light spectrum based on 6400K and mix of special red and blue diodes give the plant special “boost” during first days of life as individual plants.


Years of plant research show what light wavelengths (colors) have a positive impact during the various phases of the plant's life. We can boast that after years of study and gathering experience in indoor growing we were able to create a light panel that has perfectly matched LED wavelengths and ratios.

This module is best to use:

-When you want to apply all Photo-period (length of day/night) of 12/12, 18/16 or 24/0 hours [In the case of short day plants]

-When you want to rooting young clones


120° secondary lenses provide better light distribution which resulting in wider grow area (around 30% more in comparison to 90° lenses). It is crucial to remember that 120° lenses produce less intense light, this is why they are recommended to small and medium plants that are not bigger than 1,2m height.



tent_lamp_002.jpg

Data sheet

Height (cm) 14,5
Width (cm) 14,5
Depth (cm) 3,5
Volume (m³) 0,001
Cartons amount 1
Packing size 15x16x4,5cm
Diodes 3W Epistar
Lenses 120°

Montage

The process of changing the lightsource in LuckyGrow lamps was designed to be easy and intuitive as much as possible. Please have a look at the pictures below and see for yourself how easy it is to change the light source.

Please remember to take special caution during the process of replacement:

1) Your LuckyGrow light is not waterproof. Please make sure you avoid

splashing any water on your light, or keeping it in a high enviroment.

2) When on, please do not hit or bump your LED light as this can cause

damage.

3) Please do not daisy chain more than 4 lamps in one circuit.

4) Avoid staring directly at the LED diodes when the light is on - it may

demage your eyes.

5) Please only use components from the original manufacturer.

6) Please do not change the light source while the lamp is plugged

into the power socket, it might cause electric shock.

7) Be careful during light source replacement/instalment, some parts

of the panel might be covered in a special thermal paste to

increase lighting efficiency.

Unscrew the light module/plastic cover

Unscrew the plastic cover / light source with a screwdriver

Remove the cover / light source

Carefully remove the plastic cover / light source panel

Detach the cable

Detach the cable connecting the light source with power supply

Attach the new light source

Attach the new light source to the closest power supply

Insert the light source

Insert the light source into the housing - pay attention to the lighting module shape, and the hole in the panel.

Screw in the new light source

Screw in the new light source with a screwdriver

Products in the same category